Preparation of Fe/B powders by mechanical alloying

Steels with a high boron content are valuable as a neutron shield in waste containers and as control absorbers in nuclear reactors. The purpose of this study was to obtain by mechanical alloying an iron powder with 50% boron (by weight) and then powder-metallurgy materials. The elementary powders were mixed in a high-energy mill for 36 h in an inert atmosphere. Samples were withdrawn at intervals, and the powder was characterized by differential thermal analysis, X-ray diffraction and electron microscopy. The Fe/B powders withdrawn at different intervals of milling were diluted with further additions of iron up to a final content of 10% boron. The mixtures were uniaxially compacted at 500 MPa; their green density was verified, and they were sintered in argon at 1150°C. Their physical properties (density and dimensional change) and bending strength were evaluated and microstructural studies and fracture tests were performed.     

Electrocatalytic properties of surface oxides on gold,platinum, and stainless steel electrodes in electrooxidation of malic acid

Electrocatalytic properties of oxides formed at gold, platinum, and stainless steel electrodes in the malic acid electrooxidation in 0.1 M Na₂SO₄ are studied. Gas chromatographic analysis of the electrolyte after holding the potential at 1.0 V for 8 h shows that on platinum and gold electrodes 2 mmol of acetaldehyde are produced and on stainless steel, 45 mmol. The acetaldehyde yield is the highest on stainless steel.From Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 304–309.Original English Text Copyright © 2005 by Avramov Ivi, Popi, Antonovi.This article was submitted by the authors in English.     

Low-temperature growth and photoluminescence property of ZnS nanoribbons

At a low temperature of 450 degrees C, ZnS nanoribbons have been synthesized on Si and KCl substrates by a simple chemical vapor deposition (CVD) method with a two-temperature-zone furnace. Zinc and sulfur powders are used as sources in the different temperature zones. X-ray diffraction (XRD), selected area electron diffraction (SEAD), and transmission electron microscopy (TEM) analysis show that the ZnS nanoribbons are the wurtzite structure, and there are two types-single-crystal and bicrystal nanoribbons. Photoluminescence (PL) spectrum shows that the spectrum mainly includes two parts: a purple emission band centering at about 390 nm and a blue emission band centering at about 445 nm with a weak green shoulder around 510 nm.     

X-射线荧光光谱法测定钛铁中的硅、锰、磷、铝

介绍用X-射线荧光光谱仪测定钛铁中Si、Mn、P、Al含量的方法,通过试验确定了合适的研磨时间、压力和保压时间,用压片法制样,建立了各元素的工作曲线,各元素的测定范围分别为Si3.00%～6.00%,Mn1.00%～3.00%,P0.030%～0.070%,Al5.00%～9.00%。通过强度测量得到测定Si、Mn、P、Al的相对标准偏差分别为0.074%、0.308%、0.383%、0.040%,精密度满足测试要求。将该方法测定结果与化学法比对,准确度满足国家标准方法分析误差的要求。     

Preparation of weak cation exchange packings based on monodisperse poly(glycidyl methacrylate-<Emphasis Type="Italic">co</Emphasis>-ethylene dimethacrylate) beads and their chromatographic properties

The monodisperse, macroporous poly(glycidyl methacrylate- co-ethylene dimethacrylate) beads were synthesized by a single-step swelling and polymerization method. Based on this media, a weak cation exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages for biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The measured bioactivity recovery for lysozyme was 98+/-5%. The dynamic protein loading capacity of the WCX packings was 17.3 mg g(-1). The experimental results show that the synthesized WCX resin has very weak hydrophobicity.     

无亲水基团取代的四苯基卟吩类LB膜的制备与表征

拉制了4种无亲水基团的四苯基卟吩LB膜,用透射电镜、荧光寿命、荧光光谱和紫外-可见光谱测量表征了膜的形貌和结构,发现膜中卟吩主要以聚集体形式存在。     

Analysis of steroids. XLI. Ion-pair high-performance liquid chromatographic separation of quaternary ammonium steroids on silica.

A normal-phase ion-pair chromatographic system has been developed for the high-performance liquid chromatographic investigation of pipecuronium bromide (2 beta,16 beta-bis-(N'-dimethyl-l-piperazinyl)-3 alpha,17 beta-diacetoxy-5 alpha-androstane dibromide) and related quaternary ammonium steroids. The use of silica as the stationary phase and a 96:4 mixture of acetonitrile and water containing 0.1 mol/dm3 sodium perchlorate as the eluent with detection at 213 nm enable the potential impurities as well as the hydrolytic and oxidative degradation products of pipecuronium bromide to be separated and detected down to the 0.01% level. The above system is also applicable to the high-performance liquid chromatographic investigation of other quaternary ammonium steroids (pancuronium bromide, vecuronium bromide).     

Influence of chloride anions on the electrodeposition and electroactivity of the polymer matrix in polypyrrole,poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole) and polypyrrole derivatives functionalized by titanocene centers,in dry non-aqueous solutions

We report electrochemical studies on the influence of a small concentration of chloride ions on the electroactivity of the polymer matrix of polypyrrole (PPy), poly(N-methylpyrrole) [p(N-MePy)] and a poly(titanocene-propyl-pyrrole) derivative, p(Tc3Py) [Tc(CH₂)₃NC₄H₄; Tc=CpCpTiCl₂; Cp=C₅H₅; Cp=C₅H₄] in acetonitrile (AN), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). The polymer films were obtained on Pt disc electrodes from AN solutions of the monomers containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte and then transferred to the corresponding monomer-free solution. Studies in Cl^–-containing solutions have shown that the p(Tc3Py) matrix is very sensitive to the presence of Cl^– ions in all the above solvents, namely that it was subjected to electrochemical degradation at potentials above 0.1 V vs. a Ag/0.01 M Ag⁺ in AN reference electrode. Degradation of the p(Tc3Py) matrix was also observed in chloride-free DMF+TBAPF₆ solutions. Addition of chloride ions to the AN solution containing pyrrole, N-methylpyrrole or Tc3Py inhibits the deposition of the polymer films. On the other hand, we have found that PPy and p(N-MePy) matrices after their deposition in chloride-free AN solutions show much more stable redox responses in contact with chloride and/or DMF solutions. Possible mechanisms of these effects are discussed.Abbreviations AN acetonitrile - Cp cyclopentadienyl - DMF N,N-dimethylformamide - N-MePy N-methylpyrrole - p(N-MePy) poly(N-methylpyrrole) - PPy polypyrrole - p(Tc3Py) poly[Tc(CH₂)₃NC₄H₄] - Py pyrrole - Tc titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂, or its radical CpCpTiCl₂ (Cp=C₅H₄) - Tc3Py titanocene-propyl-pyrrole, Tc(CH₂)₃NC₄H₄ - THF tetrahydrofuran Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Two new compounds derived from bufalin

The biotransformation of bufalin by cell suspension cultures of Platycodon grandiflorus was investigated and two new biotransformed products were obtained,which was 3-epi-telocinobufagin and 3-epi-bufalin-3-O-β-D-glucoside.     

Mild and efficient synthesis of (Z)-alpha-chloroalkylidene-beta-lactones via the PdCl2-catalyzed cyclocarbonylation of 2-alkynols

[reaction: see text] A mild and efficient methodology involving PdCl(2)-catalyzed cyclocarbonylation of 2-alkynols with CuCl(2) for the synthesis of (Z)-alpha-chloroalkylidene-beta-lactones was developed. Using the readily available optically active propargylic alcohols allows convenient synthesis of the corresponding (Z)-alpha-chloroalkylidene-beta-lactones with high ee values. cis-Chloropalladation was observed as the major pathway, which is unique as compared to the reported data.